Marshall Guitar Amplifier Heads:
Marshall MG100HDFX Head,
Marshall AVT150HX 150W Amp Head,
Marshall JCM2000 Dual Super Lead 100 Head, Marshall 1959SLPX Vintage Series 100W Tube Head, Marshall 2061X Handwired 20W Amp Head.
|
Product Image |
|
|
|
Marshall MG100HDFX Head
"Drawing on the vast experience of their design team, the Marshall MG100HDFX Head amps are built to the same exacting standards as all Marshall products. Though compact in size, each one delivers a dynamic yet toneful punch, and they're all suitable for a wide variety of purposes including rehearsal, recording, and even live music work. The MG100DFX is a 2-channel amp with special features such as FDD (Frequency Dependent Damping), CD ins, plus emulated line out, and emulated headphone jacks. It features digital effects including reverb, delay, chorus, and flange. With 100W, this is a fully gig-capable amp, and it retains all the features that make it great for practice, too."
|
Pricing Details
|
|
|
Marshall AVT150HX 150W Amp Head
"The Marshall AVT150HX Head features a tube preamp and the excellent Scoop control. On Overdrive 1 this radically scoops the mid frequencies while tightening the bass for aggressive driving rhythm sounds. On Overdrive 2 the middle is again dipped, but a cut in the upper frequencies smoothes out the sound for a more bass heavy 'Nu' Metal sound. For even further flexibility, the AVT150HX houses a pair of adjustable DFX sections-one for Acoustic/Clean channels and the other for Overdrive 1/Overdrive 2. Both DFX sections are footswitchable via the supplied 6-way LED footcontroller. Driving the AVT412HX, 4x12"", 200 Watt, Celestion loaded cabinets, this 4-channel head brings absolute flexibility and forms the ultimate stage rig. For an even more imposing setup, the AVT150HX can drive standard 1960 4x12"" cabinets. Features a headphone jack, speaker-emulated line-out, effects loop with level control and FX mix control. Like all the AVTs, its preamp section is based on a 12AX7 and delivers great tone."
|
Pricing Details
|
|
Marshall JCM2000 Dual Super Lead 100 Head
"The Marshall JCM2000 Dual Super Lead 100 Head provides all the extra gain you'll ever need. Features Classic Gain and Ultra Gain channels, both with 2 modes that can take you from warm, clean tube tones to the souped-up threshold of sonic danger. A Deep switch adds a resonant bass boost for a meatier bottom end and a Tone Shift scoops out the mid frequencies making it ideal for heavy metal tones. Reverb controls for each channel let you adjust the 'verb where you need it. Rear panel features include the usual speaker outputs, effects loop, and 2 footswitch jacks for changing channels and switching reverb in and out (footswitch not included). Delivers 100W of power and includes 4 ECC83 preamp tubes and 4 EL34 power amp tubes."
|
Pricing Details
|
|
Marshall 1959SLPX Vintage Series 100W Tube Head
"This all-tube Marshall 1959SLPX tone machine cranks out fabulous lead distortion and tight crunch exactly like the original model from the 1967 to 1969 era. Inspired by Pete Townshend's unquenchable thirst for VOLUME, this guitar amp head features 100W of power from 4 EL34s and 3 ECC83s in the preamp the exact configuration of the original. True bypass series FX loop, 3-band EQ, and presence control."
|
Pricing Details
|
|
Marshall 2061X Handwired 20W Amp Head
"The Marshall 2061X 20W Amp Head is a hand-wired reissue of the model 2061, a ""Lead and Bass"" head originally produced from 1967 to 1973. With 20W of power, it churned out golden crunchy tones with depth and character. The Marshall 2061X comes with 2 EL84 tubes in the power amp, 2 ECC83s in the preamp, and a solid state rectifier."
|
Pricing Details
|
|
Marshall MG100HDFXR Amp Head
"The Marshall MG100HDFXR amp head raises the standard for what can be expected from a value-for-money guitar amplifier and defines a new benchmark.Boasting the same impressive features and versatility of the MG100DFX combo, this 100 Watt head will drive any cabinet from the Marshall range, but is best suited to the MG412A (angled) and MG412B (straight) 120 Watt 4x12 cabinets. Unbelievable tone, feel and projection come standard.Marshall's FDD (Frequency Dependant Damping) circuit accurately mimics the way an all-tube amp interacts with a loudspeaker and adds a width and depth to your sound previously impossible in an affordable solid-state amplifier."
|
Pricing Details
|
|
Marshall TSL 60 Amp Head
"This latest addition to the acclaimed JCM2000 series is a smoker! The Marshall TSL 60 amplifier head deals up 60W and an all-tube signal path (4 ECC83s in the preamp, 2 EL34 power tubes). It also features footswitchable spring reverb with separate controls (for clean and crunch/lead). Channel controls are also dual; one set for clean (gain, bass, mid, treble) and another set for crunch/lead (gain, volume, bass, mid, treble, and a Tone Shift switch to scoop mids). Other controls include a master volume, master presence, and a deep switch providing a tightly focused bass boost that fattens the sound dramatically. There's also a mix control on the back panel effects loop. Includes a 5-way LED foot controller that switches between channels, and on/off control of the reverb and effects loop."
|
Pricing Details
|
|
Marshall JCM2000 DSL50 Head
"The Marshall JCM2000 DSL50 Head provides all the extra gain you'll ever need. Features Classic Gain and Ultra Gain channels, both with 2 modes that can take you from warm, clean valve tones to the souped-up threshold of sonic danger. A Deep switch adds a resonant bass boost for a meatier bottom end, and a Tone Shift scoops out the mid frequencies making it ideal for heavy metal tones. Reverb controls for each channel let you adjust the verb where you need it. Rear panel features include the usual speaker outputs, effects loop, and 2 footswitch jacks for changing channels and switching reverb in and out (footswitch not included). The Marshall JCM2000 Head delivers 50W of power and includes 4 ECC83 preamp valves and 2 EL34 power amp valves."
|
Pricing Details
|
|
Marshall JTM45 Amp Head
"The Marshall JTM45 Amp Head is a lovingly created reproduction of Jim Marshall's first amplifier. Now the classic JTM45 is accessible to all who enjoy its glassy, clean tone and fluid, warm sustain. By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45's glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smolder beneath every note you play."
|
Pricing Details
|
|
Marshall Vintage Modern 2266 Tube Amp Head
"The Marshall Vintage Modern 2266 50 Watt Head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can..."
|
Pricing Details
|
|
Marshall AVT50HX 50 Watt Amp Head
"The AVT50HX is the head version of the AVT50X combo and is armed with the exact same killer features and tones. When driving the purpose-built AVT412XA (angled) and AVT412XB (straight) Celestion-loaded 4x12 cabinets, it delivers the extra depth and sheer total weight which only a Marshall stack or half stack is capable of!If you believe that 50 watts of solid-state power isn't sufficient to gig with, then think again, because the AVT50X is definitely the exception to that rule! Its two footswitchable channels deliver glistening ECC83-driven clean tones and a roaring crunch that just oozes vintage authenticity. Contemporary, high gain sounds that pack an unbelievable focus and punch are also possible, thanks to the extremes of gain available, coupled with the closed-back cabinet and custom 12 Celestion speaker. Other features include a CD input, a headphone jack for silent practice', a speaker Emulated DI output, an Accoutronics Spring Reverb, a Series FX Loop and a sturdy LED footswitch (supplied)."
|
Pricing Details
|
|
Marshall Accessory Bag for AVT Head
Cool graphic makes your effects bag look like a Marshall head.
|
Pricing Details
|
|
|
|
